USB-Stick is a frequently used device that "acts like a" travel file cabinet. In exchange, the bulky stack of CDs, making this compact unit is easier for all their important files and documents are on the go. And since this unit has replaced what we used in our "once disks" place, it is perhaps the best time to transfer all the files in this innovative data storage. This rule calls for the need to boot USB stick inFloppy-mode.
When we say boot, it basically means the manipulation of the functions and settings from computer hardware and software to serve our goal. This also applies to external hard drives such as USB flash drives. In successful start to the flash drive floppy receive mode, an access drive and get the images from your disk. This way, you can use the image to create a bootable CD. The other big thing that it is from thisthe use of "raw write. This is a utility for Windows, the drive allows the computer to flash, write to the floppy image to the USB. Even without the disk utility, what USB stick bootable can to do just that.
Here are some of the things you need to do in this project:
A PC that supports booting from USB flash drive. Check the BIOS for details. No problem for newly purchased computers for recently manufactured units supports thisFunctionality.
A flash drive that booting applications in general, includes boot / system files and boot sector area.
References to drive A: lines.
A formatted floppy disk in WinXP when using XP as a boot disk.
To actually a USB flash boot disk in floppy mode, it must be made bootable first.
Here is how to manually bootable your USB Flash Disk:
Make the USB drive is the drive lead sequence. The flash disk will not allowthe partition to be active or bootable in any other way. To do this, simply plug the drive in, power the computer and the BIOS and boot sequence will initiate. If this does not work, disable or remove the other drives in the system.
Restart your computer with a DOS shell from the bootable floppy disk or CD and make sure that USB flash drive is already plugged in
Run the flash disk.
Initiate recruitment of the primary partition on the USB drive, click on theSet Active Partition "option in flash disk. If your USB flash disk does not have a primary partition, then use to create the flash disk.
Exit flash disk.
Restart the computer this time plugged with a DOS shell from a bootable floppy disk or CD with the USB already
Check the contents of the primary partition on your USB drive, you can command the DOS "dir c:"
Format and copy the boot file on the primary partition of the USB flash drive, you canUsing the DOS "format / sc" command.
Write the master boot record on the USB drive by typing "fdisk / mbr" to do so without the partition table.
Restart the computer after booting the USB drive. If everything went well, the c> prompt is displayed.
These tips may or may not be effective, even if it's right. In any problem with your USB flash drive boot problems, you can get a qualified technician to.
No comments:
Post a Comment