How to Save Your Old Hard Drive

So you have finally decided to change the old piece of electronics with a blazing new PC. But if you think about it, is perhaps not throw away all the old stuff, random hard drive technology - especially not as fast progress in microprocessor technology, and even if the old hard drive can not store so much that you are now thinking that, after all, perhaps, to use even as a backup device. Here are a few tips on how to make this happen.

The firstQuestion comes to mind is: Why can not I just hook up? Unfortunately, the hard drive does not at first how this works, unless it is the only device is installed. If this is not the case, you have a few setups to work for this change to right.

With the PC is turned off, plug the old hard drive, then enter the boot setup screen to do - the procedure based on the specific hardware you use, depends on just at the start of the message, the screen displays the consideration. boot

After pressing the right button, you should have the boot setup screen, enter: find the "device" is displayed. Had, in a typical configuration, you want the new, larger hard drive as 'Master' and the old, recycled as a "slave". This means that the bigger the hard disk containing the operating system and the MBR (master boot record, boot information) should be used, while the second hard drive no longer need to have installed an operating system,and can be used to store only the data. Leave the boot screen and, when prompted, save the changes you made.

As a precaution, it is probably a good exercise to optimize the boot sequence. When you stop the boot setup screen, your computer must be restarted. Again, for the early arrival messages on the screen, but looks for the boot button, at this time. When you press it, you'll see a page with a list of hardware from which you boot your PC. Remember that thenew hard drive is the first in the list (and, if possible, remove the old hard drive from the list as well). CAUTION: Equipment in this list are not generally assigned to standard Windows identifiers such as "C" or "D", but with their model, so it's a good idea to verify, whether the mark of the two hard drives, Before you do this.

At this point, everything should be ready to start. Depending on your situation, you can either proceed with the installation ofOperating system of choice, or just hold it together with the advantages of a backup unit. If something went wrong, do not panic: You can undo your changes by clicking again in the boot screen as you used to be.

Finally, it is a good idea to backup your hard disk before you use the format. Now you have an old / new disk, remember - especially if one of them is an external USB drive - always hang out beforeRemove the cable connection to the motherboard, or you could even with serious data loss.

format sd card anti spam servers

How to Put Music on PSP - Step By Step Guide

One of the features of PSP is the ability to play music files, ie MP3 format. Some PSP can include other types of music files like windows own play WMA and WMV format, but we get later in the. However, the newer version of the PSP are limited. This is an overview of how the music put on the PSP.

The steps are no different than transferring all the files from your PC to PSP memory stick. In order to put music on PSPrequire a USB cable.

This is how you put music on PSP:

1. Connect your PSP to the PC via the USB cable.

2. Use your PSP interface and press the HOME button and then go to "Settings". Here you have the use
the directional button and you will find "USB Connection"

3. Once the connection is established, you need to check your PC's available disk drives. You can do this by
go to "My Computer". The PC should recognize the PSP, and as an additional drive.There is not much
unlike with portable drive or USB flash drives actually.

4. Click assigned to your PSP drive.

5. Create a new folder call "music" on your PSP drive

6. Select your MP3 music from your PC and drag it into your "Music" folder on your PSP. Note that all
This is done in your PC interface.

7. If you want to transfer all the MP3 from the USB connection mode by pressing the "O" on
PSP.

8.Here you will find the music area in your PSP and select your memory stick. Your search for "Music" folder and
They are good to go.

If you use other types of music format on your PC, ie WMV or WMA, you will need a converter to convert these files into MP3 format. Do not worry though, as Sony PSP will also provide users with their own Image Converter. You can easily convert, WMA and WMV files to MP3 format, format, and repeat the entire process, how to shareMusic on PSP.

On the other hand, if you want, WMV and WMA files without converting your files to MP3 playback, you can always upgrade your PSP firmware to the latest firmware. However, I would not recommend this (expansion of the PSP firmware), since it is difficult to limit your PSP experience. Some of the effect, that is your PSP firmware that certain games have you do not work on your PSP with the latest firmware. There are forums dedicated to PSP downgrading how many people want toback to their old firmware.

"Same as the music from your PSP?" Was asked countless times, and with the PSP port, it is as simple as transferring files on your USB stick. Hope this article helps.

format sd card